Avery Dennison FreshMarx 9417 System Administrator Guide - Manual (Page 47)

Using the Edit Utility 6-7
2. Click a blank button to add a new product or click an existing product button to edit.
The Button Properties screen appears. This screen varies depending on the format
selected for each category. See “Editing Category Buttons” for more information.
3. Enter the Button Name.
4. Enter the Label Data (for example: Description 1, Description 2, and Description 3). The
Label Data information prints on the label when the product button is pressed.
If nothing is entered for Description [1], the text entered for the Button Name is used.
5. Enter the Use By Description. The default is “MUST USE BY.”
6. Set the product’s duration (expiration time). See “Setting the Options” for more information
about expiration times.
7. Enter any other information as necessary.
8. Click OK when finished.
9. Click the Category Buttons on the right to edit product buttons within the different categories.
10. Click OK when finished.
11. Click File, then Save to save changes. The data file must be saved as a Unicode text file
(.dat) to be loaded into a printer.