Calibrating the sensor, Calibrating the sensor -5 – Avery Dennison FreshMarx 9417 System Administrator Guide User Manual

Page 59

Performing Maintenance 8-5

C a l i b r a t i n g t h e S en so r

You need to calibrate the sensor if your printer skips labels or prints off the label.

1. Press the Tools button.

2. Press Admin.

3. Enter the Admin password and press Enter. The default password is 1234.

4. Press Maintenance.

5. Press Calibrate Sensor.

6. Follow the on-screen instructions to properly load supply for sensor calibration.