Avery Dennison FreshMarx 9417 System Administrator Guide - Manual (Page 49)

Using the Edit Utility 6-9
U p d at i n g t h e Ap p l i ca t i o n ’ s S o f t w a r e
You can use an Ethernet connection to update the Application’s software. To perform updates
using Ethernet, the Edit Utility’s IP address must match the printer’s IP address.
Download the latest application from our Web site on your computer.
Note: Save the file to your computer’s hard drive, not a network drive.
1. Start the Edit Utility.
2. Connect the printer to your computer using an Ethernet cable.
3. Turn on the printer.
4. Click Update, then Application Softw are.
5. Select the 130444 FreshMarxVxx.cab (“xx” indicates the version number) file you
downloaded from the Web site.
6. Click Open.
7. The printer enters download mode. This may take several minutes. A message appears
when the download is complete.
8. Click OK.
The printer restarts automatically and loads the latest application.
Note: If you do not have an Ethernet connection, see “Updating your Application’s Software
via USB” for more information.