AMETEK 2003RP - Manual (Page 16)

2.3 Measurements [Option]
Note: Specifications listed below apply from 300 Hz to 500 Hz. Refer to Supplemental
Specifications for frequencies outside this range.
Parameter Specification Unit
True RMS Current Available on standard unit.
Ranges 0.000 - 4.000
0.00 – 6.00
A
RMS
A
RMS
Accuracy 0.2 % FS + 0.3 % reading
Resolution 0.001
0.01
A
RMS
A
RMS
Peak Current
Ranges (Remote only) 0.00 – 12.00
0.0 – 20.0
A
PEAK
A
PEAK
Accuracy 0.5 % FS + 0.5 % reading
Resolution 0.01
0.1
A
PEAK
A
PEAK
Crest Factor Available over bus only. Requires interface option
Range 0.00 - 4.00
Accuracy 0.05
Resolution 0.01
True RMS Voltage
Range 0.0 - 320.0 V
RMS
Accuracy 0.1 % FS + 0.05 % reading
Resolution 0.1 V
RMS
Real Power
Range 0 - 800.0 W
Accuracy 0.2 % FS + 0.5 % reading
Resolution 0.2 W
Apparent Power Available over bus only. Requires interface option
Range 0 - 800.0 VA
Accuracy 0.3 % FS + 0.8 % reading
Resolution 0.1 VA