D-Link KX-TDA100 - Manual (Page 218)

3.3 Installation of the KX-TDA Maintenance Console
218 Installation Manual
Installing the KX-TDA Maintenance Console
Notes
• Make sure to install and use the KX-TDA Maintenance Console for version 2.0.
• To install or uninstall the software into Windows 2000 Professional or Windows XP Professional,
the user must be grouped either of "Administrators" or "Power Users".
• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must have been
installed. Follow the instructions of the wizard to install the KX-TDA USB driver.
Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and connect
to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will setup the following basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/break/night) can
be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with ) is selected, " " must prefix
all feature numbers (except access numbers) when an extension user wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator call
and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the PBX (including
the country code). When necessary, this number will be used to access the PBX from a remote
location for maintenance purposes.
1. Save the setup file of the KX-TDA Maintenance Console
on your PC.
2. Double-click the icon to execute the setup file.
3. Follow the instructions of the wizard.