Pin for ps registration – D-Link KX-TDA100 User Manual

Page 168

2.8 Connection of DECT Portable Stations

168

Installation Manual

Setting the Personal Identification Number (PIN) for PS Registration

To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set to the Hybrid
IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to the Hybrid IP-PBX into the
PS. By doing so, the PS will only be registered to the Hybrid IP-PBX with the matching PIN.

Notes

•

By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS. Therefore, the
PS can be registered to the Hybrid IP-PBX without setting the PIN.

•

The PIN for PS registration will only be used when registering the PS to the Hybrid IP-PBX.
Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN near the PS, the PS
will not be linked to a different Hybrid IP-PBX during normal operation after registration.

Setting the PIN for Hybrid IP-PBX

Changing the Display Language of the PS

Using the KX-TCA155/KX-TCA255

Using the KX-TD7590

Using the KX-TD7580

[692]

1 to 4 digits

PIN for PS Registration

END

ENTER

1234

Select
"Setting Handset".

Select
"Select Language".

Select
"Display Option".

Select the desired
language.

Press POWER
for 2 seconds.

Select
"DISPLAY SETTING".

Select the desired
language.

Select
"LANGUAGE".

Press POWER
for 5 seconds.

SELECT

Select
"Setting Handset".

Select "Select
Language".

Select
"Display Option".

Select the desired
language.

Press POWER
for 2 seconds.