D-Link KX-TDA100 - Manual (Page 146)

2.8 Connection of DECT Portable Stations
146 Installation Manual
CAUTION
• The CS should be kept free of dust, moisture, high temperature (more than 40 °C), low temperature
(less than 0 °C), vibration, and should not be exposed to direct sunlight.
• The CS should not be placed outdoors (use indoors).
• The CS should not be placed near high voltage equipment.
• The CS should not be placed on a metal object.
• Do not use this wireless system near another high power cordless system such as DECT or SS
wireless.
• Keep the distances listed below between equipment in order to prevent noise, interference or the
disconnection of a conversation. (The distance may vary depending on the environment.)
*1 The number may vary depending on the country/area. In Taiwan, it is 1880 MHz to 1895 MHz.
*2 The number may vary depending on the country/area. In Taiwan, it is 8.
Equipment Distance
CS and office equipment such as a computer, telex, fax
machine, etc., or microwaves More than 2 m
CS and PS More than 1 m
Each PS More than 0.5 m
Hybrid IP-PBX and CS More than 2 m
Too many CSs in a small area can cause problems due to conflicts over which signal channels
each CS can use. Ideally, CSs should be a minimum of 25 m to 40 m apart.
However, the required distance between CSs may vary depending on the environment of the
installation site and conditions in which the wireless system is used. Conduct the site survey to
determine the appropriate distance.