5 site survey, Testing the radio signal strength, Cs no – D-Link KX-TDA100 User Manual
Page 183: Scan data no
2.9 Connection of 2.4 GHz Portable Stations
Installation Manual
183
2.9.5
Site Survey
The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After installing the
CSs temporarily, set the PS to the Radio Signal Test mode and measure each CS coverage area. Then,
record the results on the map of the installation site.
Testing the Radio Signal Strength
Note
The display language for the site survey is only in English.
1.
Enter the Radio Signal Test mode.
Using the KX-TD7680
Using the KX-TD7690
Notes
*1: CS number and radio signal strength level.
*2: Scan data (test result) number. Empty memory space will be indicated by a number; stored memory
space will be indicated by a "-".
Display example:
Press 1, 9, and POWER
for more than 2 seconds.
<< SEARCHING >>
CS NO.1 LEVEL:12
*
1
SAVE:0123456789
*
2
1 to 9
CS No.
1
9
9
0 to 9
Scan Data No.
To store the scan data
0
Display example:
Press 1, 9, and POWER
for more than 2 seconds.
<< SEARCHING >>
CS NO.1 LEVEL:12
*
1
SAVE:0123456789
*
2
1 to 9
CS No.
1
9
9
0 to 9
Scan Data No.
To store the scan data
0