6 after site survey – D-Link KX-TDA100 User Manual
Page 161
2.8 Connection of DECT Portable Stations
Installation Manual
161
2.8.6
After Site Survey
After obtaining the proper measurement results, exit the Radio Signal Test mode before connecting the CS
to the Hybrid IP-PBX.
1.
Keep pressing POWER button on the PS until the PS is turned OFF.
2.
Disconnect the AC adaptor or battery box from the CS and stop supplying electricity.
3.
Switch all DIP switches on the CS from ON to OFF.
1
2
3
4
5
6
OFF
ON