Adtec digital Soloist-HD Pro (version 02.07.09) Manual User Manual
Page 77
Audio Decode
●
Dolby Digital AC-3: Bit rates up to 640kbps. Sample rates of 32, 44.1 and 48KHz. Downmix to 2
channel Dolby Pro Logic, Multi-channel 5.1 downmix.
●
MPEG 1 and MPEG 2 Layer I, II and III (MP3) 2.0: Bit rates up to 448kbps (Layer I), 384kbps
(Layer II) or 320kbps (Layer III). Sample rates of 16, 22.05, 24, 32, 44.1 and 48KHz. Single
channel, dual channel, joint stereo and stereo modes.
●
AAC-LC MPEG-2 and MPEG-4:(max 384kbps) Sample rates of 7.35, 8, 11.025, 12, 16, 22.05, 24,
32, 44.1 and 48KHz.
Soloist HD Pro Media Player
●
Storage: 750GB internal provides up to 70 hours at 10 Mbps
●
Embedded Linux real time operating system.
●
Power: 70-240 VAC 50-60Hz and 65 Watts (20 Watts typical)
●
Size: 1RU rack mount chassis. 19” wide, 10.5” deep, 1.75” tall
●
Weight: 8 lbs.
●
Environmental: 0 to 90 Degrees Fahrenheit, Less than 70% RH, Non-Condensing
Communications and Control
●
Ethernet 10/100 (RJ-45) Half Duplex, Full Duplex, Auto Negotiate
●
GigE 10/100/1000 (RJ-45) Half Duplex, Full Duplex, Auto Negotiate
●
Ethernet Protocols: Telnet, FTP, Adtec command API.
●
Serial Communications: 2-RS232 (38400-115200 bps, 8, 1 N)
●
Embedded Automation: List, Loop, Schedule Logging.
Front Panel
●
Keypad: Mode, Select, Enter, Escape, Up, Down, Left, Right
●
Blue Translucent LCD (20 characters by 2 rows)
●
Host Status LEDs Power, Alarm, Link, Busy, Storage/Aux.
●
Decode Operation LEDs Play, Multicast, Video, Audio, Display Target (NTSC, PAL, 720, 1080,
Other), Alarm