Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 20)

Back Panel Diagram
Note: Some connectors have been discontinued or changed over the life of the product. Consult your units’ rear panel for correct
placement cables and connectors.
Enlarged back panel segments to show connector placement
Connections
Connection Function
DVB-ASI IN Incoming video signals
75 Ohm,terminated SMPTE 259M BNC connector
HD/SD SDI OUT 75 Ohm terminated SMPTE 259M and SMPTE292M (auto-detect) BNC
connector
HDMI HDMI v1.3 and DVI v1.0 compliant transport
CVBS OUT 75 Ohm terminated NTSC or PAL D1 Composite Video Output. BNC connector
GbE (eth1) 10/100/1000 base T ethernet interface; 2 LED indicators
Link- device networked
Busy- traffic on interface