Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 34)

Host Timer time interval between
mirroring operations. It is
noted in seconds.
text filed;
default is 600 (s)
*.SYSD HOT
Host IP tells the device where to look
for new files user-defined;
default is 192.168.10.1 *.SYD HIP
Client
Username the ftp username to be used
during mirroring and other ftp
sessions
user-defined text field;
default is adtec *.SYSD CPW
Client
Password
the ftp password to be used
during mirroring and other ftp
sessions
user-defined text field;
default is none *.SYSD CPW
Communications
Control Function Options API Command
XCP sends a system command to
a remote client using XCP
protocol or show change XCP
usage
Off
On *.SYSD XCP
XCP Key sets the XCP Security Key in
hexadecimal. A value of zero
indicates that the unit will
respond to any XCP
command. A non-zero key
requires a matching XCP key
in the XCP command before
it will respond. The default
value is zero
user-defined text
field;
default is
0x00000000
*.SYSD XCK
Bark sends API commands to
system and redirects output
over network to the BARK
HOST IPADDRESS.
Commands can be packed
together using a colon
Off
On
*.SYSD BARK
Bark Host the IP address to which the
command responses should
be sent via the BARK
Protocol
user-defined;
default is
192.168.10.1 *.SYSD BARKLIST HOST
Bark List the list of commands to be
sent when using BARK
user-defined text
field *.SYSD BARKLIST
Bark
Interval
the frequency at which you
want the string of commands
to be sent back to the
designated Bark Host
*.SYSD BARKLIST
INTERVAL
Bark Port the port on the receiving
server that is expecting the
command data from Bark
text field;
default is 514
range is 1025 -
65535
*.SYSD BARKLIST PORT