Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 59)

FTP Mirror Mode
In Mirror Mode, an Adtec device can be configured to mirror content, via FTP, from an FTP server. Adtec
devices that support Mirror Mode can be set to perform one of three roles in a Mirror Mode configuration:
Mode Role
Client unit is serving as a traditional network client- mirroring is off
MirrorList MirrorList mode puts the device in ‘list’ mirroring mode. Only specified
content within a text based list will be downloaded. The list is referred to as
the MLF or MirrorListFile. An MVL file extension is now required for the MLF.
MirrorList is useful for units with smaller storage capacity. They will only
download content within the MLF file
MirrorClient MirrorClient mode puts the device in ‘total’ mirroring mode. It will download
all content hosted on an FTP server with the given credentials to
it’s /hd0/media/ folder, including SHD, SMIL, and DVC files
Configurations
MirrorClient
Name Specification API Command
Host Mode The FTP mode of the unit,
client/mirrorclient/mirrorlist
*.SYSD HOM mirrorclient
Host IP Address The FTP Server to mirror content from *.SYSD HIP x.x.x.x
(where x.x.x.x is the IP
address of the external
server)
Host Timer Time, in seconds, to wait until next server
login
*.SYSD HOT xxx
[where xxx is time in
seconds, default = 600
(10 minutes)]
Client Username
Password
Username and Password to login to FTP
Server
*.SYSD CPW
username,password
FTP Client Pasv. Changes between Active and Passive
Mode. Default is Passive
*.SYSD FPA passive
FTP Time Out Maximum time in seconds that the FTP
Client waits for a response from remote
system, default = 4 seconds
*.SYSD FTO 4
FTP Data Time Out Maximum time that client waits on
inactivity from remote system during file
transfer, default = 45 seconds
*.SYSD FDO 45
No Not Replace MPEG This allows the mirroring mode to not
replace content even if it already exists on
the unit and the date on the server is
newer; default = no. NO will replace items
when the time/date stamp is different on
the server.
*.SYSD DNR no