Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 23)

Chapter 3 - On-Board Control Interface
Control Application
Adtec Digital provides a web-based command and control (C&C) Graphical User Interface (GUI) application
for our products, often referred to as Web UI. Soloist HD Pro devices with firmware versions 2.05.XX and
up are able to use this application.
Browser Compatibility:
● Firefox ®: 3.0 (recommended) and higher
● MS Internet Explorer®: 7.0 and higher
● Safari®: 3.0 and higher
● Opera®: 9.0 and higher
● Google Chrome®: 31 and higher
Note for Safari® users:
● The C&C program is designed to use the Bonjour Zero Configuration Protocol.
○ When using Safari, click on the " ^^ " symbol to open a networked devices list.
○ Select the device to point the browser to that device's IPA.
○ IE® and Firefox® users can use Bonjour through the use of plug-ins.
* Note to mediaControl Users *
The latest firmware versions on the Adtec Soloist HD Pro Media Player will no longer work with the older
mediaControl interface software.
● mediaControl will not work with firmware versions after 2.3.14.
Zero Configuration Technology
Adtec Digital makes use of Zero Configuration technology to make it easier to integrate your Adtec device into your IP
network. With one mouse click, the device will assign itself an open IP address and announce its presence to the rest of
your network. Adtec devices will reference themselves by serial number, which is also located on the back of the device.
If you wish to access the web application without using Bonjour, and have configured your device with an IP address
manually through the front panel, point a web browser to the device's IP address; the web application sign-in page (see
below) will display.