Adtec digital Soloist-HD Pro (version 02.07.09) Manual - Manual (Page 53)

Now that the firmware file has been transferred to the unit, the newly uploaded firmware file will be
located at the bottom of the firmware screen under a new section labeled “Available Firmware
Versions.” (illustrated below)
Image reduced for clarity
Select the Install button associated with the newly uploaded firmware to extract the firmware file and
make the firmware available to be selected on the units’ Installed Firmware Versions list at the top of
the window. You will receive a popup window asking for confirmation. Select Ok on the prompt window.
Once you choose to Install the firmware, you should see a pop-up message indicating the firmware file is
being extracted to the unit. During this time, your units web controller will not be able to be used. You
will see a notice such as this: