Adtec digital TBGS w/adManage - Manual (Page 14)

Chapter 2 - Getting Started 12
FCMP
FCMP
The configuration of FCMP is used when a FCMP server exists as a part of
the TBGS system. FCMP is an IP address satellite delivery system. It is used
to distribute the media, MVLs, and schedules to each headend. Current and
future schedules are used as a reference for a basic delivery list. Comparing
the basic delivery list to the RDY retreived by autoDialer, the Delivery service
creates a true delivery list of required files for each site. Once the delivery
list is created, the FCMP server will deliver this content directly to each edjeL.
The edjeL in turn EMTs the media and pass-throughs the MVL and schedules
to the duets at the headend.
To modify the FCMP configuration of a headend, browse to Configuration >
FCMP . (Figure 2.5)
The following fields are available for FCMP.
Select Headend: You must select a headend to assign a FID (FCMP ID) to.
Single click on the desired headend. Complete the following fields to configure
the FCMP setup for that headend.
Control ID: Select from the available options to specify the FCMP structure
you are configuring. (FCMP structures are defined and created by the FCMP
setup wizard)
Associated FID: The FCMP IDs already associated with that headend.
Available FID: The FCMP IDs available to the system.