Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 58)

Power Usage
70-240 VAC switching power supply
50/60 Hertz
Rated at 150 Watts nominal usage 40 watts
Physical
Measurements: (H X W X D) 1.75” X 19” X 14”
11 pounds gross weight
Management
8 Button Tactile Raised Keypad Front Panel with Status LEDs
Browser-based Web Interface
10/100 base-T Ethernet and GigE
HTTP, FTP, Telnet, IP Logging, SNMP MIB II and private MIB, DHCP, (XCP
Adtec encrypted layer 3 protocol)
Terminal Monitor port
Use: API Serial Communication Interface
Default Baud Configuration: 38,400 bps 8 data bits 1 stop bit no parity
Connector: 8 pin RJ45 (supplied with DB9 to RJ45 adapter)
Use: Serial Port Used for Troubleshooting (Terminal)
Baud Configuration: 115,200 bps 8 data bits 1 stop bit no parity
Specifications Disclaimer: Specifications subject to change without written notice. Copyright
2013 Adtec Digital. DPI-1200 is a trademark of Adtec Digital. Other product and company
names may be trademarks or registered trademarks of their respective companies. This
information may not, in whole or in part, be copied, photocopied, reproduced and translated, or
reduced to any electronic medium or machine-readable form without prior consent in writing
from Adtec Digital.