Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 15)

● The DPI-1200 is always logged in on startup.
● If the device has logged out due to accident, or a login duration timer being set (see
below), you will need to log back in. To log in from a logged-out status follow the key
sequence below. Note that the key sequence spells the word U-S-E-R.
Step Action
1 Press 2Press <Up> arrow 3 Press <Select>4 Press <Enter>5 Press <Right> arrow6 Press The front panel also has a login duration capability. This setting allows you to specify a time
frame in which the unit will automatically log itself out if it receives no control inputs via the
front panel or API session.Possible Values:
0 (Zero): The unit will not auto-log-out
1-9: The number of minutes until log out if no input is received.Main System Banner MenuThe main banner menu is a non-editable display. It displays the current installed and applied
firmware version the unit is running as well as the product name.Key FunctionsWhile in the main menu, the following navigation keys have special meaning in the operation of
the DPI-1200.
Increase LCD Contrast / Brightness1. Press and hold and buttons
2. Press arrow to desired levelDecrease LCD Contrast / Brightness1. Press and hold and buttons
2. Press arrow desired levelReset the unit1. Press and hold and buttons
2. Press the arrow
3. Release all three buttons at the same timeSystem Menu Pages: 1 … 13 14 15 16 17 … 58 wrong Brand wrong Model non readable See also other documents in the category Adtec digital Video: DPI-1200 (version 01.04.08U) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (67 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (68 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) EN-80 (version 2.02.28) Quick Start (2 pages) EN-30 (version 1.02.02) Manual (59 pages) RD-30 (version 2.1.1) Quick Start (1 page) RD-30 (version 2.1.1) Manual (39 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) YUV2QAM (version 01.02.01) Manual (46 pages) Soloist-HD Pro (version 02.07.09) Manual (77 pages) EN-91 / EN-91P (version 1.02.29) Quick Start (2 pages) DTA-3050 (version 6.02.14) Manual (94 pages) EN-20 (version 2.03.06) Manual (63 pages) mediaHUB-HD Pro (version 03.07.19) Studio Encoder Quick Start (2 pages) RD-60 (version 1.13.02) Quick Start (2 pages) edje-5110 (version 01.02.05) Manual (98 pages) eyeMonitor (42 pages) TBGS w/adManage (50 pages) Soloist 4111 (version 02.07.03) (1 page) EN-40 (version 2.02.24) (2 pages) mediaHUB (version 02.00.13) (24 pages) edje-5110 (version 01.02.05) Quick Start (2 pages) MAS & iptvManage (44 pages) AVS2 (5 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Manual (104 pages) Sitemap
2 Press < U p> arrow
3 Press < S elect>
4 Press < E nter>
5 Press < R ight> arrow
6 Press
The front panel also has a login duration capability. This setting allows you to specify a time
frame in which the unit will automatically log itself out if it receives no control inputs via the
front panel or API session.
Possible Values:
0 (Zero): The unit will not auto-log-out
1-9: The number of minutes until log out if no input is received.
Main System Banner Menu
The main banner menu is a non-editable display. It displays the current installed and applied
firmware version the unit is running as well as the product name.
Key Functions
While in the main menu, the following navigation keys have special meaning in the operation of
the DPI-1200.
Increase LCD Contrast / Brightness
1. Press and hold and buttons
2. Press arrow to desired level
Decrease LCD Contrast / Brightness
1. Press and hold and buttons
2. Press arrow desired level
Reset the unit
1. Press and hold and buttons
2. Press the arrow
3. Release all three buttons at the same time
System Menu