Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 56)

Select SCTE30 Splice Response Messages
Resul
t
Result Name Description
100 Successful Response
104 Invalid/Unknown Channel
Name
Possible configuration error
105 Invalid Physical Connection Possible configuration error
108 Splice Failed – Unknown Failure
110 No Insertion Channel Found This error shall be returned if the Insertion
Channel is missing at the start of a splice.
111 No Primary Channel Found This error shall be returned if the Primary
Channel is missing at the Splice-in or Splice-out
times.
112 Splice_Request Was Too Late The Splice_Request message was not received
early enough (3 seconds) for the Splicer to
initiate the splice.
113 No Splice Point Was Found The Splicer was unable to find a valid point to
splice into the Primary
Channel
Appendix D - Technical Specifications
Inputs
10/100 base-T Ethernet Connector: 8 pin RJ45 x1
Gigabit Ethernet Connector: 8 pin RJ45 x1
NAS Compliant Storage Interface
DTMF/GPI
Twelve GPI or GPO
Twelve DTMF Input (-10 to +0 dB)
Outputs