Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 22)

the Ad insertion
receiving interface on
the Splicer
Splice
Multicast
Port
Port number used for
IP Streaming in
conjunction with
Multicast Address.
user-defined; numeric field
Note: If you are using the same
Multicast or Unicast address for
multiple channels, the Multicast
Port will need to be incremented by
2 for each channel
(The valid range is 1-65535)
*.DPID MSP #
Note: Up to twelve Insertion Channels are available on the product. If using API
Commands, the ‘#’ denoted in the Commands above are relevant to the twelve channel
destinations indexed 0 - 11.
Cue Menu
The following diagram illustrates the structure and flow of the Cue Menu on the Adtec DPI-
1200 device.
Item Function Options Adtec API
Commands
DTMF
History Displays the recent
history of tones for
each channel being
cued with DTMF cues Non-editable display, status only. *.DPID THS #
DTMF Time
Newest Displays the time the
most recent DTMF
tone sequence was
heard for a channel Non-editable display, status only.
Displayed in the format: Weekday
Hour:Minutes:Seconds:Milliseconds
(Day HH:MM:SS.mmm) *.DPID THS #
TIMENEW
DTMF Time
Oldest Displays the time the
oldest DTMF tone
sequence was heard
for a channel Non-editable display, status only.
Displayed in the format: Weekday
Hour:Minutes:Seconds:Milliseconds
(Day HH:MM:SS.mmm) *.DPID THS #
TIMEOLD
GPI State Displays the current
state of the GPI
Trigger port for a Non-editable display, status only *.DPID GHS #