Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 43)

partial verifications.
0013 Failed, Timeout The break was closed before spot could be aired.
Problem with media to be inserted. Timing issues
with stream to be spliced
0020 Failed, No Ad Copy in
Inserter
The DPI did not have the scheduled ad copy to play.
Causes include: - Material not copied into adManage
MasterVideoLibrary2.
- The material is not in the inserter because of a
communication error.
- The material is on the headend PURGE list (see
Content Management Purge).
0023 Failed, No Cue in
Window No cue was received in the scheduled window. See
the chapter on Cue Methods for more information
Triggering Explained
DTMF Tone Triggers
DTMF tone board is an option for DPI-1200.
The Integrated Satellite Receiver Decoder (IRD) typically has a DTMF port which provides
audio cue tones. Alternately, some networks use the secondary audio (SAP) channel to
provide the cue tones. The DTMF tones should be nominally spaced by 50msec and be
between 0.5v and 1.0v peek to peak.
Appearance of DTMF connector on the DPI-1200 back panel:
● Connect + and – for DTMF analog tone input to DPI-1200.
● 12 DTMF connectors, each corresponding to its channel number – for example, DTMF
01 connector is for channel 01.
● To configure Netset, please refer to NETSET MENU.
GPI / GPO Triggers