CONTA-CLIP GSM-PRO User Manual
Page 35
GSM-PRO
- 33 -
6.4
6.4
6.4
6.4
Digital Input
Digital Input
Digital Input
Digital Inputssss
6.4.1
6.4.1
6.4.1
6.4.1
Configuration
Configuration
Configuration
Configuration
Configure the following items:
•
Name; this name must be unique and cannot be used with any other input or output. Default
set as DI1 to DI8.
•
The Digital Inputs can generate messages when:
-
A rising flank is detected: the status changes from 0 to 1
-
A falling flank is detected: the status changes from 1 to 0
A delay in seconds can be set which a changed DI has to exceed before it is accepted, during the
delay the UI led blinks. If the status of the delay is changed again before the delay is expired the
change is discarded.
Set the delay to 0 to disable detection delay.
6.4.2
6.4.2
6.4.2
6.4.2
Reading
Reading
Reading
Reading from
from
from
from a
a
a
a digital
digital
digital
digital input
input
input
input
To retrieve the status of a digital input, send:
rui
rui
rui
ruin
, where n is the number of the requested input. The
module answers: ‘status DIn=x’
When a user defined name is given to an input it can be addressed by putting the name between
asterisks. E.g. if an input is called ‘door’, you read the status by sending
r*
r*
r*
r*door****
. The module
answers: ‘status door=x’