3 smtp smtp smtp smtp – CONTA-CLIP GSM-PRO User Manual

Page 23

GSM-PRO

- 21 -

If the internet connection has to maintain after restart, this can be configured remotely.
5.2.2

5.2.2

Roaming

If roaming is disabled the module blocks SMS and data connections when registered to a foreign
GSM network.
NOTE: contact your GSM service provider for roaming rates to avoid unexpected high billing.

5.2.3

5.2.3

APN settings

To register to a GPRS connection, enter the APN (Access Point Name) settings of your GSM service
provider. If these settings are unknown to you, request them at your provider.

Before uploading them into the module the APN settings can be tested by pressing the ‘test’ button.
This tests the APN settings entered into the fields in the interface.

Remotely check the GSM data connection by sending:

cdc

. The module answers with the status of

the connection.
5.2.4

5.2.4

OTA

OTA Time synchronisation

Time synchronisation

The module can check online if date/time is not correct, if needed the module performs a
synchronisation.
When selected this action is performed approximately every 24hours after powering up.

To synchronize date/time by SMS send:

time

. The module takes the provider message timestamp to

synchronise.
The module answers: set time to .

NOTE: after synchronizing date/time the module automatically restarts.

5.2.5

5.2.5

App

Mark the checkbox to synchronize your GSM-PRO’s events and IO status so it can be read and
controlled by an Apple iOS or Android App.

5.2.6

5.2.6

Portal

Mark the checkbox and fill your PC’s remote IP and port to allow the GSM-PRO to access the Portal
software.
See the GSM-PRO Portal manual for further instructions.

5.3

SMTP

Enter the SMTP (Simple Mail Transfer Protocol) settings for outgoing email. The SMTP is used to send
email via outgoing mail server. Insert these values only if you want the module to send emails.