CONTA-CLIP GSM-PRO - Manual (Page 14)

GSM-PRO
- 12 -
4.3 4.3 4.3 4.3
Diagnostics
Diagnostics Diagnostics Diagnostics
After connecting to the module the diagnostics tab is filled. This page shows:
• Registered GSM network or connection errors
• Signal strength in percentage and signal quality
•
Module timestamp
•
Module firmware version
•
IMEI number
•
Error messages:
-
SIM PIN code required
-
SIM PUK code required
-
No SIM card
-
Date / Time not set
-
No user selected
-
No network registration
Refresh the diagnostics tab by clicking the ‘diagnostic check’ button.
To request the diagnostics by SMS send:
status status status status .
Press the ‘check data connection’ button to test if a GPRS (internet) connection can be established by
the module. Check chapter 5.2. for further instructions on setting up an internet connection.
4.3.1 4.3.1 4.3.1 4.3.1 Signal quality Signal quality Signal quality Signal quality
The signal quality information is defined by the Dutch Telecom Agency according to GSM network
regulations. The full list is shown in the appendix.
To request the signal strength /and quality by SMS send:
csq csq csq csq .