CONTA-CLIP GSM-PRO - Manual (Page 32)

GSM-PRO
- 30 -
6.2 6.2 6.2 6.2
Universal Input
Universal Input Universal Input Universal Inputssss
The GSM-PRO has 8 universal inputs which can individual be configured as:
• Analog input AI (0..10V)
• Digital input DI (default)
The selected button represents the chosen function and is set after uploading.
6.2.1
6.2.1 6.2.1 6.2.1 Read
Read Read Readin in in ing g g g from from from from multiple universal input multiple universal input multiple universal input multiple universal inputssss
To read all universal inputs send the default message: rmui rmui rmui rmui
The module sends a status message with the input states: ‘read UI1=xxxx, UI2=xxxx, …. UI8=xxxx’. UI
is replaced by the configured input type: AI or DI.
6.2.2
6.2.2 6.2.2 6.2.2 Select
Select Select Select receivers receivers receivers receivers
The recipients receive the messages of the selected UI. The sequence of messaging is determined by
the order of selected users (nr 1 to 10).
NOTE: Selected UI users do not have any rights to send commands to the module.
6.2.3
6.2.3 6.2.3 6.2.3 Confirmation sequence
Confirmation sequence Confirmation sequence Confirmation sequence
When the confirmation is enabled, the module sends the message to the selected users one by one
with an adjustable interval delay.
E.g. the sequence starts, the first phone number is addressed. When the delay time has expired, the
next phone number in the list is addressed, and so on until the last phone number in the list is
addressed.
This can be repeated for selected number of times before the module stops the sequence.
The user who receives the message is able to stop the confirmation sequence by sending a chosen
text (can be left blank) to the module before the delay has expired. The module answers:
‘Confirmation ended ’
NOTE: When a new status is reached on the UI, a new sequence is started and the old sequence is
stopped automatically.