CONTA-CLIP GSM-PRO - Manual (Page 25)

GSM-PRO
- 23 -
5.4.1
5.4.1 5.4.1 5.4.1
Event log
Event log Event log Event log
When this log is enabled the GSM-PRO logs the following events:
•
Reached threshold limits on the AI inputs
•
Rising and falling flank on the digital inputs (DI)
•
Received messages
• Sent messages
• Data transmissions
• OTA updates
When connected, view this log by clicking ‘view event log’. View remote by sending:
evlog evlog evlog evlog directly
followed by a valid email address (e.g. evlog evlog evlog evlog [email protected]). When ready, the module answers
with a confirmation message and the event log is received at the email address.
When connected erase the event log by clicking ‘erase event log’. Erase remote by sending:
evclr evclr evclr evclr .
The module answers with a confirmation message.
NOTE: on heavy usage the event log is filled rapidly. It is highly recommended to choose the auto
send option when enabled.
5.4.2
5.4.2 5.4.2 5.4.2 AI AI AI AI log log log log
Choose the interval for the AI log:
•
10 min (5 days)
•
15 min (7.5 days)
•
20 min (10 days)
•
30 min (15 days)
•
45 min (22.5 days)
• 60 min (30 days)
The log duration in days is based on logging 1 AI.
When connected, view this log by clicking ‘view AI log’. View remote by sending:
ai ai ai ailog log log log directly
followed by a valid email address (e.g. ailog ailog ailog ailog [email protected]). When ready the module answers
with a confirmation message and the AI log is received by the email address.