CONTA-CLIP GSM-PRO - Manual (Page 18)

GSM-PRO
- 16 -
4.5 4.5 4.5 4.5
Settings
Settings Settings Settings
4.5.1 4.5.1 4.5.1 4.5.1 Main settings Main settings Main settings Main settings
The main functions of the module are configured in the ‘settings’ tab:
• Module name
• SIM pin number, this is the pin number to access the SIM card. By most providers it is default
set to 0000.
4.5.2
4.5.2 4.5.2 4.5.2 Periodical message Periodical message Periodical message Periodical message
The GSM-PRO can send a periodical message on a user defined time:
• Daily, set the time
• Weekly, set the day and time
• Monthly, set the day of the month and time
This message can be supplemented with the actual status of all IOs.
4.5.3
4.5.3 4.5.3 4.5.3 Power cycle message
Power cycle message Power cycle message Power cycle message
The GSM-PRO can send a message on every module start up, so the users are aware of a power
recovery.
4.5.4
4.5.4 4.5.4 4.5.4 Power down message Power down message Power down message Power down message
On power loss the module holds enough capacity to send SMS messages to the first 5 selected GSM
users.
The GSM-PRO detects a power down when the power < 8V and returns when the power > 10V.
NOTE: The module tries to send the message to all defined users in the settings tab with the
guarantee of the first 5 selected users.
4.5.5
4.5.5 4.5.5 4.5.5 Active users Active users Active users Active users
The active users are those who have full access to the module and receive the auto messages. The
sequence of messaging is determined by the order of selected users (nr 1 to 10).
If a user only needs to access the module but doesn’t want to receive any messages uncheck the
checkbox behind the user.
Click the button ‘Copy users to UIs’ to copy the selected users from the settings tab to all UI tabs.