CONTA-CLIP GSM-PRO - Manual (Page 28)

GSM-PRO
- 26 -
6 6 6 6
I/O
I/O I/O I/O CONFIGURATION AND ME CONFIGURATION AND ME CONFIGURATION AND ME CONFIGURATION AND MESSAGING SSAGING SSAGING SSAGING
The module responds to read and write commands. Commands are preceded by an ‘r’ for read and
‘w’ for write actions.
All SMS commands are NOT case sensitive.
6.1 6.1 6.1 6.1
Digital Output
Digital Output Digital Output Digital Outputssss
6.1.1 6.1.1 6.1.1 6.1.1 Configuration
Configuration Configuration Configuration
The GSM-PRO has 4 CO outputs. The following items can be configured with the software:
• Name, this name must be unique and cannot be used with any other input or output. Default
set as DO1 to DO4.
•
After setting a digital output the module sends a confirmation message followed by the actual
output state. This message is sent only to the sender of the message.
• Send only the user defined text, this sends only the text defined in the message box, no
module name, IO name and timestamp. See section 6.6.
•
Define your own instructions to control the output.
•
Activate or toggle the output when starting a phone call with the module.
• Link DO to DI
• Activate when GSM connection lost, deactivate when GSM connection returns.
• Preserve or deactivate the status on restart or power cycle.