CONTA-CLIP CMS-110A-UI - Manual

CONTA-ELECTRONICS ===== = = = = = = = = =
CMS CMS CMS CMS----I10A I10A I10A I10A----UI UI UI UI
=
===== ===== ===== =====IIIIsolated solated solated solated S S S Signal ignal ignal ignal converter converter converter converter
Further information: www.conta-clip.com Cat. No.: 95120.0 Further information: www.conta-clip.com
Electrical specifications Electrical specifications Electrical specifications Electrical specifications Manual Manual Manual Manual
=
=
=
=
=
=
The CMS-I10A-UI is a multi-functional 3-way isolated
signal converter. This module is used for galvanic
isolated high current measurement and conversion.
Also a threshold relay output is provided.
The 3-way isolation enables the module to be used
locally as well as in the vicinity of the controlling
system.
The inputs and outputs of the converter are configured
by means of dipswitches.
Any combination of input and output can be chosen,
so numerous different signal conversions can be set.
Default input/output setting is 0..10A / 0..10V.
Other default input/output settings on request.
=
=
Order information Order information Order information Order information
Type
CMS-I10A-UI
Cat.no 15901.2
Input data Input data Input data Input data
range (select via dipswitches)
0..0,5A / 0..1A / 0..5A / 0..10A AC and DC
max. voltage 250V AC/DC
measuring principle true RMS / arithmetic average
AC input frequency 45..65Hz
Output data Output data Output data Output data
voltage output (select via dipswitch)
0..10V / 0..5V / 1..5V / 10..0V
load resistance > 1kOhm
current output (select via dipswitch) 0..5mA, 0..10mA, 0..20mA, 4..20mA
load resistance < 600 Ohm
relay output 1 CO contact
max. switching voltage 250V~
rated / inrush current (ohmic load) 3A / 5A
max. power rating 750VA
electrical life span at rated, 23°C and ohmic load: 3 x 105 cycles
mechanical life span 15 x 106 cycles
contact material AgNi 90/10
test voltage coil-contact 4kV
General data General data General data General data
module power supply
24V DC ±10%
module current (without load) Approx. 60mA
conversion error < 0,5% of In
linearity error < 0,5% of In
temperature coefficient < 0,05 %/°C
response time 200ms
offset voltage @ 3x In overload < 0,7% of In
CE marking Low Voltage Directive (LVD) 2006/95/EC, according requirements of EN 61010
EMC Directive 2004/108/EC, according requirements of EN 55011 and EN 61326-1
isolation voltage input / power 3,5kV, 50Hz, 1min.
isolation voltage input / output 3,5kV, 50Hz, 1min.
isolation voltage output / power 1kV, 50Hz, 1min.
operating / storage temperature 0°C…+50°C / -20°C…+70°C
conductor cross section 0,2 - 2,5 mm²
connection system screw clamp connection, pluggable
insulation stripping length 7 mm
mounting / installation position DIN-rail TS35 / any
module size LxWxH (TS35) 17,5 x 99 x 114,5mm
weight 130 gr
=
=
=
Features:
Features: Features: Features:
• Multiple High Current input (0..0,5A, 0..1A, 0..5A, 0..10A, True RMS AC
and AVG DC)
• Multifunctional analog output (U,I)
• Threshold relay output with adjustable set point and hysteresis
• Current range selectable via DIP switches
• 3-Way galvanic isolation
• Power supply 24V DC
• Extremely simple Zero-Calibration by pressing calibration button for 5
seconds
CMS-I10A-UI manual rev1.fl.doc