BINDER KMF 115 - Manual (Page 88)

KMF (E5.3) 07/2014 page 88/98
18.4 KMF technical data
Exterior dimensions
Width
mm / inch 1250 / 49.21
Height (incl. feet/castors) mm / inch 1925 / 75.79
Depth mm / inch 887 / 34.92
including door handle, I-triangle, connection mm / inch 939 / 36.97
Wall clearance rear (minimum) (spacer) mm / inch 100 / 3.94
Wall clearance side (minimum) mm / inch 100 / 3.94
Steam space volume l / cu.ft. 918 / 32.4
Number of doors 2
Number of inner glass doors 2
Interior dimensions
Width
mm / inch 973/ 38.31
Height mm / inch 1250 / 49.21
Depth mm / inch 576 / 22.68
Interior volume l / cu.ft. 700/ 24.7
Number of racks (standard / max.) 1/15
Load per rack kg / lbs. 45 / 99
Permitted total load kg / lbs. 150 / 331
Weight (empty) kg / lbs. 309 / 681
Temperature data (without humidity)
Temperature range 1)
°C / °F -10 to +100 / 14 to 212
Average heating up time acc. to IEC 60068-3-5 K/min. 1.0
Average cooling down time acc. to IEC 60068-3-5 K/min. 0.4
Heating up time 2) from -10 °C / 14 °F to +100 °C /
212 °F
minutes 110
Cooling down time 2) from +100 °C / 212 °F to -10 °C
/ 14 °F
minutes 350
Climatic data (with humidity)
Temperature range 1)
°C / °F +10 to +90 / 50 to 194
Temperature fluctuation 3) ± K 0.1 to 0.5
Temperature uniformity (variation) 3) ± K 0.2 to 1.0
Humidity range % r.H. 10 to 90
Humidity fluctuation 3) ± % r.H. ≤ 2
Dew point temperature range °C +5 to +80
Electrical data
IP system of protection acc. to EN 60529
20
Nominal voltage (+/-10%) V 200 to 240 1N~
Power frequency Hz 50/60
Power plug shock proof plug
Nominal power kW 3.10
Energy consumption 4) at 85 °C / 185 °F and 85 %
r.H.
Wh/h 1050
Installation category acc. to IEC 61010-1 II
Pollution degree acc. to IEC 61010-1 2
Over-current release category B, 2 poles Amp 16
Noise level approx. dB (A) 53