BINDER KMF 115 - Manual (Page 22)

KMF (E5.3) 07/2014 page 22/98
Note on second-hand units (Ex-Demo-Units):
Second-hand units are units that were used for a short time for tests or exhibitions. They are thoroughly
tested before resale. BINDER ensures that the chamber is technically sound and will work flawlessly.
Second-hand units are marked with a sticker on the unit door. Please remove the sticker before commis-
sioning the unit.
3.2 Guidelines for safe lifting and transportation
The front castors can be blocked by brakes. After operation, please observe the guidelines for temporarily
decommissioning the unit (chap. 16.2). Please move the units with castors only when empty and on an
even surface, otherwise the castors may be damaged.
CAUTION
Sliding or tilting of the unit.
Damage to the unit.
Risk of injury by lifting heavy loads.

Transport the unit in its original packaging only.
 For moving or shipping, secure the constant climate chamber with transport straps.
∅ Do NOT lift or transport the unit using the door, the handle, or the lower housing.
 Lift the units using technical devices (fork lifter). Set the fork lifter only from the front or
rear in the middle of the unit.
∅ Do NOT set the fork lifter from the unit side.
You can order transport packing for moving or shipping purposes from BINDER service.
Permissible ambient temperature range during transport:
•
If the steam humidifying system has NOT been emptied: +3 °C / 37.4 °F to +60 °C / 140 °F.
• After BINDER Service has emptied the steam humidifying system: -10 °C / 14 °F to +60 °C / 140 °F.
With temperatures below +3 °C / 37.4 °F, water must be completely removed from the humidifying sys-
tem.
CAUTION
Transport below +3 °C / 37.4 °F with filled steam humidifying system.
Freezing in the steam generator.
Damage to the unit.

Contact BINDER Service before any transportation below +3 °C / 37.4 °F.