BINDER KMF 115 - Manual (Page 44)

KMF (E5.3) 07/2014 page 44/98
9. Program operation
The MB1 2-channel program controller permits programming temperature and humidity cycles. It offers 25
program memory positions with 100 program sections each. The total cumulative number of program
sections is limited to 500. It is not possible to link several programs.
For each program section a temperature set-point, a humidity set-point, the fan speed (0% to 100%), and
the switching-state of up to 8 operation lines (non-functional with standard unit) can be entered.
Programming is possible directly by the keypad of the controller or graphically by the software APT-
COM™ 3 DataControlSystem (option, chap. 14.1) specially developed by BINDER.
9.1 Menu-based program entry
Displays showing the initial normal display in Idle Mode
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
TEMP
0.0
26.8
°C
HUMID
0.0
58.6
%rH
HAND
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
FAN SPEED
50
%
HAND
X - TEMP
26.8
°C
X - HUMID
58.6
%rH
Hit button PGM. The window program selection appears.
Select a program via the arrow keys and confirm by pressing “ENTER”
The following display serves to select a
subroutine:
TP-Program 1 Entry of temperature values and fan speed setting
TP-Program 2 Entry of humidity values
TP-Program 3 no function
DEL PGM
08:43:55 15.12.13
Prog select Fr. Abs. 372
Prog 1 PROG 01 
Prog 2 PROG 02 
Prog 3 PROG 03 
Prog 4 PROG 04 
Prog 5 PROG 05 
Prog 6 PROG 06 
Prog 7 PROG 07 
Prog 8 PROG 08 
Prog 9 PROG 09 
Prog10 PROG 10 
Prog11 PROG 11 
Prog12 PROG 12 
Prog13 PROG 13 
Prog14 PROG 14 
Prog15 PROG 15 
Prog16 PROG 16 