Altera Mentor Verification IP Altera Edition AMBA AXI4-Stream - Manual (Page 200)

Mentor Verification IP AE AMBA AXI4-Stream User Guide, V10.3 200
Getting Started with Qsys and the BFMs
Setting Up Simulation from the Windows GUI
April 2014
Note
Do not use the ModelSim vmap command to specify the installed location of the Mentor
VIP AE because this places the definition of the environment variable MvcHome in the
[library] section of modelsim.ini. For example, do not use the command
vmap MvcHome
$QUARTUS_ROOTDIR/../ip/altera/mentor_vip_ae/common.
Questa Simulation
To run a Questa simulation, follow the process detailed in the ModelSim Simulation section.
Cadence IES Simulation
Before starting a Cadence IES simulation, you must do the following:
•
Check that the $QUARTUS_ROOTDIR environment variable points to the Quartus II
software directory in the Quartus II software installation. The example script
example-ius.sh requires this variable to locate the Mentor VIP AE BFMs during
simulation.
•
Set the environment variable CDS_ROOT to the installation directory of the IES Verilog
compiler ncvlog. The cds_root command returns the installation directory of the
specified tool ncvlog.
setenv CDS_ROOT `cds_root ncvlog`
Starting a Simulation from a UNIX Command Line
To start a simulation with the Cadence IES simulator from a UNIX command line:
1. Change the directory to the work directory containing the example to be simulated.
cd axi4stream-qsys-examples/ex1_back_to_back_sv
2. Start the Cadence IES simulator with the example-ius.sh script.
•
For a 32-bit simulation, execute this command:
sh example-ius.sh 32
•
For a 64-bit simulation execute the command:
sh example-ius.sh 64
Note
For details about the process steps performed by the example-ius.sh script, see the section
Cadence IES Example Script Processing .