Pilz PMCprimo 16+.00/0/1/6/4 - Manual (Page 35)

9 PScope
User Manual for Motion Control Tools Page 35
9.3 Toolbar
Using the toolbar you have direct access to important functions of the program.
Opens a new blank PScope document.
Opens an existing PScope file from disk.
Saves the current PScope file.
Displays full pages of the current PScope file before printing.
Prints the current PScope screen.
Sends the current document via email.
Starts recording (with trigger function).
Stops recording.
Switches record mode (controller
/ amplifier).
Automatical Hardware identification. Detects the hardware connected to PScope.
Shows or hides the parameter bar.
Shows or hides the measuring function.
Autoscale function for the PScope View.
Clears the PScope screen.
Reads the previous recorded scan from the system (only controller mode).
Starts the terminal program PTerm.
Starts the setup software PDrive.
Starts the text editor PEdit.
Starts the Motion Generator PMotion.
Displays the help file.
Opens the “About” dialogue box.