Pilz PSSnet SHL 8T MRP - Manual (Page 69)

Loading software updates
70
4.3 Loading the software via file selec-
tion
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
4.3 Loading the software via file
selection
For an update via a file selection window, the device software must be on a
data carrier that you can access via your PC.
Select the Basics:Software dialog.
In the file selection frame, click on “...”.
In the file selection window, select the device software (device.bin)
and click on “Open”.
Click on “Update” to transfer the software to the device.
The end of the update is indicated by one of the following messages:
X Update completed successfully.
X Update failed. Reason: incorrect file.
X Update failed. Reason: error when saving.
X File not found (reason: file name not found or does not exist).
X Connection error (reason: path without file name).
After successfully loading it, you activate the new software:
Select the Basic Settings:Restart dialog and perform a cold
start.
In a cold start, the device reloads the software from the non-volatile
memory, restarts, and performs a self-test.
In your browser, click on “Reload” so that you can access the device
again after it is booted.