Pilz PSSnet SHL 8T MRP - Manual (Page 131)

Network load control
132
8.5 Flow control
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.5.2 Setting the flow control
Select the
Basics:Port Configuration dialog.
In the "Flow Control on" column, you checkmark this port to specify
that flow control is active here. You also activate the global "Flow
Control" switch in the
Switching:Global dialog.
Select the Switching:Global dialog.
With this dialog you can
X switch off the flow control at all ports or
X switch on the flow control at those ports for which the flow control
is selected in the port configuration table.