Pilz PSSnet SHL 8T MRP - Manual (Page 3)

Content
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
3
Content
About this Manual 9
Key 11
Note:Introduction 13
1 Access to the user interfaces 15
1.1 System Monitor 16
1.2 Command Line Interface 18
1.3 Web-based Interface 21
2 Entering the IP Parameters 25
2.1 IP Parameter Basics 27
2.1.1 IP address (version 4) 27
2.1.2 Netmask 28
2.1.3 Classless Inter-Domain Routing
31
2.2 Entering IP parameters via CLI 33
2.3 Entering the IP Parameters via HiDiscovery 36
2.4 Loading the system configuration from the SCA 39
2.5 System configuration via BOOTP 41
2.6 System Configuration via DHCP 46
2.7 System configuration via DHCP Option 82 49
2.8 Web-based IP configuration 50
2.9 Faulty device replacement 52
3 Loading/saving settings 53
3.1 Loading settings 54
3.1.1 Loading from the local non-volatile memory 55
3.1.2 Loading from the AutoConfiguration Adapter 55
3.1.3 Loading from a file 56
3.1.4 Resetting the configuration to the state on delivery 58