Pilz PSSnet SHL 8T MRP - Manual (Page 146)

Network load control
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.6 VLANs
147
Figure 43: Assign and save Port VLAN ID, Acceptable Frame Types and
Ingress Filtering
Assign the ID of the related VLANs (1 to 3) to the individual ports.
Because terminal devices usually do not send data packets with a
tag, you select the admitAll setting for the terminal device ports.
Configure the uplink port with admit only VLAN tags.
Activate Ingress Filtering at the uplink port so that the VLAN
tag is evaluated at this port.
Click on “Write” to accept the new settings temporarily.
Select the dialog Basic Settings:Load/Save to save the exam-
ple configuration permanently.