Pilz PSSnet SHL 8T MRP - Manual (Page 38)

Entering the IP Parameters
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
2.4 Loading the system configuration
from the SCA
39
2.4 Loading the system configu-
ration from the SCA
The AutoConfiguration Adapter (SCA) is a device for
X storing the configuration data of a device and
X storing the device software.
In the case of a device failure, the SCA makes it possible to easily transfer
the configuration data by means of a substitute device of the same type.
When you start the device, it checks for an SCA. If it finds an SCA with a valid
password and valid software, the device loads the configuration data from
the SCA.
The password is valid if
X the password in the device matches the password in the SCA or
X the preset password is entered in the device.
To save the configuration data in the SCA, see „Saving locally (and on the
ACA)“ on page 59 .