Pilz PSSnet SHL 8T MRP - Manual (Page 36)

Entering the IP Parameters
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
2.3 Entering the IP Parameters via
HiDiscovery
37
Figure 10: HiDiscovery
When HiDiscovery is started, it automatically searches the network for those
devices which support the HiDiscovery protocol.
HiDiscovery uses the first PC network card found. If your computer has
several network cards, you can select these in HiDiscovery on the toolbar.
HiDiscovery displays a line for every device which reacts to the HiDiscovery
protocol.
HiDiscovery enables you to identify the devices displayed.
Select a device line.
Click on the symbol with the two green dots in the tool bar to set the LEDs
for the selected device flashing. To switch off the flashing, click on the
symbol again.
By double-clicking a line, you open a window in which you can enter the
device name and the IP parameters.