Rate limiter, 1 description of the rate limiter, 2 rate limiter settings – Pilz PSSnet SHL 8T MRP User Manual
Page 115: 3 rate limiter
Network load control
116
8.3 Rate Limiter
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.3 Rate Limiter
8.3.1 Description of the Rate Limiter
To ensure reliable data exchange during heavy traffic, the device can limit the
traffic.
Entering a limit rate for each port specifies the amount of traffic the device is
permitted to transmit and receive.
If the data load transmitted at this port exceeds the maximum load entered,
the device will discard the excess data at this port.
A global setting enables/disables the rate limiter function at all ports.
8.3.2 Rate Limiter settings
Select the Switching:Rate Limiter dialog.
X
"Ingress Limiter (kbit/s)" allows you to enable or disable the input lim-
iting function for all ports.
X
"Egress Limiter (Pkt/s)" allows you to enable or disable the broad-
cast output limiter function at all ports.
X
"Egress Limiter (kbit/s)" allows you to enable or disable the output
limiter function for all packet types at all ports.