Pilz PSSnet SHL 8T MRP - Manual (Page 41)

Entering the IP Parameters
42
2.5 System configuration via BOOTP
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
switch_01:ht=ethernet:ha=008063086501:ip=149.218.112.83:tc=.global:
switch_02:ht=ethernet:ha=008063086502:ip=149.218.112.84:tc=.global:
.
.
Lines that start with a '#' character are comment lines.
The lines under ".global:" make the configuration of several devices easier.
With the template (tc) you allocate the global configuration data (tc=.global:)
to each device .
The direct allocation of hardware address and IP address occurs in the de-
vice lines (switch-0...).
Enter one line for each device.
After ha= enter the hardware address of the device.
After ip= enter the IP address of the device.
In the appendix under „Setting up DHCP/BOOTP server“ on page 180 you
will find an example for the configuration of a BOOTP/DHCP server.