Pilz PSSnet SHL 8T MRP - Manual (Page 126)

Network load control
PSSnet SHL - Basic Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
8.4 QoS/Priority
127
„
Assigning the VLAN priority to the traffic classes
„
Assigning the traffic class to a DSCP
interface 1/1 Switch to the Interface Configuration mode of
interface 1/1.
vlan priority 3 Assign port priority 3 to interface 1/1.
exit Switch to the Configuration mode.
enable Switch to the Privileged EXEC mode.
configure Switch to the Configuration mode.
classofservice dot1p-map-
ping 0 4
classofservice dot1p-map-
ping 1 4 Assign traffic class 4 to VLAN priority 0. Also assign
traffic class 4 to VLAN priority 1.
exit Switch to the privileged EXEC mode.
show classofservice dot1p-
mapping Display the assignment.
User Priority Traffic Class
------------- -------------
0 4
1 4
2 1
3 3
4 4
5 5
6 6
7 7
enable Switch to the Privileged EXEC mode.
configure Switch to the Configuration mode.
classofservice ip-dscp-map-
ping cs1 1 Assign traffic class 1 to DSCP CS1.
show classofservice ip-dscp-mapping
IP DSCP Traffic Class
------------- -------------
0(be/cs0) 2
1 2
.
.
8(cs1) 1
.