Overview, Module structure, Module features – Pilz PSSu E F PS User Manual
Page 9: 2overview, 1 module structure, 1 module features

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1
Module structure
2
Overview
2
2000
Overview
Overview
2-
2.1
Module structure
2100
Module structure
2-
][BA bersicht Aufbau
A module consists of
Electronic module and
Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and
are used to connect the field wiring. The electronic modules are inserted
on to the base modules and determine the module's function.
Details of the base modules that can be used are available in the chapter
entitled “Intended Use”.
2.1.1
Module features
Module features
2-
][Merkmale_Versorgung PS
Power supply for max. 1.5 A
The module supply is not buffered if the supply voltage is interrupted
Separate infeed for periphery supply
Separate infeed for module supply
Infeed for C-rail supply
][Merkmale_LED PS
LEDs for:
– Module supply
– Periphery supply
– Module error
][Merkmale_Zusatz
Application range depends on the base module
][Geraetemerkmal_T
Coated version of the module:
PSSu E F PS-T: for increased environmental requirements