Pilz PSSu E F PS - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-5
4.2 Configuration
4 Function description
4.2 Configuration 4200 Configuration 4- 4.2.1 Application as a general supply module
Application as a general supply module 4- ][Funktionsbeschreibung_BA_Konfig PS
The module can provide a standard bus system with various status in-
formation. To do this, the general supply voltage module (the first mod-
ule after the head module) must be configured for read access. The
configuration is made in the PSSuniversal Configurator in the PSS WIN-
PRO system software:
 Read access through the standard bus system:
“R” configuration
Further information on configuration is available in the PSSuniversal
Configurator's online help.
4.2.1.1 Addresses in the process image
Addresses in the process image 4- ][Funktionsbeschreibung_BA_PA PS
If read access is configured, the module occupies 8 consecutive bit ad-
dresses in the ST-PII process image. The first supply module after the
head module on slot 0 supplies status information about the PSSu
system.
Configuration SafetyBUS p Standard bus system
FS-PIO ST-PII ST-PIO
None - - - - - - - - -
Read ST
(“R”) 8 Bit - - -
INFORMATION
Further information on the structure and contents of the status
byte can be found under “Operation”.