Pilz PSSu E F PS - Manual (Page 17)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-1
4.1 Module features
4 Function description
4 4000 Function description Function description 4- 4.1 Module features 4100 Module features 4- 4.1.1 Supply voltage
Supply voltage 4- ][Funktionsbeschreibung PS
The product provides the module supply and periphery supply for the
modules on the module bus:
 Module supply
Supply voltage for subsequent module (right-hand side)
 Periphery supply
Supply voltage for sensors, actuators and test pulses
 C-rail
Infeed of the permitted additional supplies for the C-rail; a detailed
description of how to use the C-rail can be found in the system de-
scription.
When the supply voltage is fed in separately, the module supply and pe-
riphery supply are galvanicaly isolated. If galvanic isolation is not re-
quired, a common power supply may be used for the periphery supply
and module supply.
The module enables
 The module supply and periphery supply to be refreshed:
The relevant base module interrupts the connection to the incoming
(left-hand) module supply, periphery supply and C-rail on the module
bus. The 0 V supply on the module supply is connected to the left and
right.
 Supply groups to be formed
The relevant base module interrupts the connection to the incoming
(left-hand) periphery supply and C-rail on the module bus. Each sup-
ply group requires its own supply module.