Pilz PSSu E F PS - Manual (Page 31)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-5
6.2 Terminal configuration
6 Wiring
 For use as a supply module to refresh the module supply and periph-
ery supply
 For use as a supply module to form supply groups
– To interrupt the incoming periphery supply and C-rail
– To provide subsequent modules with the module supply, periphery
supply and C-rail supply
 With these base modules the supply module cannot be used as the
first module after the head module.
Base module Terminal configuration
Screw terminals:
PSSu BS-R 1/8S
PSSu BS-R 1/8S-T
Cage clamp terminals:
PSSu BS-R 1/8C
PSSu BS-R 1/8C-T
11: +24 V infeed for module supply,
interrupted to the left
21: 0 V infeed for module supply
12-22: 0 V periphery supply,
interrupted to the left
(12-22 linked within the base module)
13-23: +24 V periphery supply,
interrupted to the left
(13-23 linked within the base module)
14-24 C-rail supply,
interrupted to the left
(14-24 linked within the base module)
21 11
22 12
23 13
24 14