Pilz PSSu E F PS - Manual (Page 26)

5.3 Inserting and removing an electronic module
5 Installation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-4
5.3.2 Removing an electronic module
Removing an electronic module 5- ][Elektronikmodul ziehen
Procedure:
 Press the locking mechanisms [1] together simultaneously.
 Pull out the electronic module [2].
Schematic representation:
5.3.3 Changing an electronic module during operation
Changing an electronic module during operation 5- ][Montage BA Hot Swapping PS
NOTICE
Supply voltage modules may only be inserted and removed
when the supply voltage is switched off.
[1]
[2]
[1]