Pilz PSSu E S 4AI U - Manual (Page 26)

4.2 Configuration
4 Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-10
4.2.4 Summary and overview
Summary and overview 4- ][Funktionsbeschreibung_BA_Zusatz Tabelle ST-Ein 4xU
The module has the following configuration options:
Default va-
lue Key
Input range 0 0 V … 10 V (cannot be changed)
Manufacturer scaling active 1/TRUE Activated
Manufacturer scaling offset 0 Offset: Magnitude 0
Manufacturer scaling gain 8194
D
8x amplification, displaced three bit places
User scaling active 0/FALSE deactivated
User scaling offset 0 Offset: Magnitude 0
User scaling gain 256
D
1x amplification, signal unchanged
Range monitoring active 1/TRUE Activated
Upper limit value 4095
D
Upper limit of number range
Lower limit value -4095
D
Lower limit of number range
Limit value 1 active 0/FALSE deactivated
Limit value 1 -32 767 Lower limit of number range
Limit value 2 active 0/FALSE deactivated
Limit value 2 32 767
D
Upper limit of number range
Sign and magnitude representation
active 0/FALSE Deactivated; two's complement is activated
Output ADC raw value only 0/FALSE deactivated
ADC initialisation value 4096
D
4096
D
(1000
H
) is issued when no data is detected.