Vortech 2006-2010 6.1L Jeep SRT8 - Manual (Page 51)

P/N: 4CK020-010 v6.0, 02/17/2012
©2012 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured 41
Verify:
Smooth power assist •
Noiseless operation •
Proper fluid level •
No system leaks •
No bubbles, foam or discoloration in fluid •
M. Verify that the gilmer belt is running smoothly.
If wear is detected on the side of the belt, it is
probably too tight. If it is vibrating excessively,
tighten until there is minimal movement.
N. Turn off vehicle and recheck all fluid levels
and verify that no hoses, wires, etc. are near
exhaust headers or moving parts and that
there is no fluid leakage.
O. Be sure both front fender liners are secured w/
supplied pull lock pins.
P. Test drive vehicle by gradually working up to
full throttle and paying close attention to any
abnormal sounds or engine detonation.
NOTE: Read the STREET SUPERCHARGER SYSTEM OWNER’S
MANUALAND RETURN THE WARRANTY REGISTRATION
FORM within thirty (30) days of purchasing your supercharger
system to qualify for the 3 year limited warranty.